EN343
Protection against rain.
Resistance to water penetration and water vapour resistance are the two main properties in the EN 343 test.
The following parameters are used:

Resistance to water penetration (3 levels)
Resistance to water penetration is the most important quality for an adequate protection. The resistance to water penetration is expressed in kPa but a more understandable expression is in millimeter water column.

Water vapour resistance - Breathing properties (3 levels)
The classic and easy to understand unity for breathability was defined in g/m 2  per 24 hours. However EN 343 uses a water vapour resistance value Ret (m 2 . Pa/W), which is measured by the 'so-called' skin model test ISO 11092.

Article
Composition
Weight
Weave
Usable Width
Finishes
WORKCODE˘ç 21
100% PES
245gsm
3/1 Twill
150cm
Water Repellent
PU BR Coated
WORKCODE˘ç 54
100% PES
345gsm
2/1 Twill
139cm
Water Repellent
PU BR Coated
WORKCODE˘ç 54
100% PES
345gsm
2/1 Twill
139cm
Water Repellent
PU BR Coated
WORKCODE˘ç 137
100% PES
140gsm
1/1 Plain
150cm
PU BR Coated
WORKCODE˘ç 150
100% PES
220gsm
1/1 Plain
150cm
PU BR Coated
WORKCODE˘ç 190
100% PES
200gsm
1/1 Plain
140cm
Water Repellent
PU BR Laminated
WORKCODE˘ç 191
100% PES
185gsm
1/1 Plain
140cm
Water Repellent
E-PTFE Laminated
WORKCODE˘ç 193
100% PES
240gsm
1/1 Plain
140cm
Water Repellent
PU BR Laminated
Knitted Polyamide backer
WORKCODE˘ç 194
100% PES
185gsm
1/1 Plain
140cm
Water Repellent
PU BR Laminated
WORKCODE˘ç 195
100% PES
145gsm
1/1 Plain
140cm
Water Repellent
PU BR Laminated
WORKCODE˘ç 19
100% PES
249gsm
1/1 Plain
140cm
Water Repellent
PU BR Laminated